SMD - Official Portal

 Structural Materials & Degradation   

Research Grants and Publications

 External Grants

No Leader Code Type Title

Amount

(RM)

Status
1 Dr. Dandi Bachtiar RDU130138 FRGS Study Of Thermo-Mechanical Properties Of Sugar Palm Fibre Reinforced Polyurethane Thermoplastic Composites For Use As Exterior Material In Automotive Industry 71,500 On going
2 Dr. Januar P. Siregar RDU140120 FRGS Characterization of Biodegradable Composites Based on Pineapple Leaf Fibre and Tapioca Bioplastic Resin 83,000 On going
3 Dr. Ruzaimi Rejab RDU151312 RACE Periodic Two-Dimensional Square honeycomb Stucture from Biodegradable Composite:Finite Element Analysis and experimental Investigation 50,000 On going
4 Dr. Ruzaimi Rejab RDU140116 FRGS Multiaxial Modelling of Lightweight Sandwich Structures based on Corrugated-cores for Aerospace Application 124,000 On going
5 Dr. Salwani Mohd Salleh RDU160140 FRGS Investigation on Initial Peak Force and Energy Absorption of High Strength Steel Crash Box Having Notch as Initial Trigger Mechanism.  99,440 On going
6 Dr. Tedi Kurniawan RDU140110 FRGS Pack Cementation Coating to Improve Corrosion Resistance of High Chromium Steels for Boiler Application 118,000 On going
7 Dr. Mohd Akramin Mohd Romlay RDU170383 FRGS Formulation of Initial Flaw Size for New Crack Growth under Fatigue Loading 95,700 On going
8 Dr. Ruzaimi Rejab UIC171505

Ningxia University-International grant

Mechanical Behavior of Sandwich Structures based on Corrugated Cores

56,502 On going
                                                                                                 TOTAL 698,142  

 

Internal Grants

No Leader Code Type Title Amount Status
1 Dr. Dandi Bachtiar RDU130342 RDU Development of Novel Green Hybrid Thermoplastic Composites 22,800 On going
2 Dr. Januar P. Siregar RDU140307 RDU Compatibilizing Effect of Maleic Anhydride on the Mechanical Properties of Mengkuang Leaves Fibre Reinforced Polythylene Composites 15,800 On going
3 Dr. Juliawati RDU160394 RDU Investigation of microstructure development and corrosion performance of friction stir welded light alloy 34,500 On Going
4 Dr. Ruzaimi Rejab RDU1403109 RDU Development of Periodic Two-Dimensional Honeycomb Structures for Sandwich Panels 37,000 On going
5 Dr. Tedi Kurniawan RDU1403112 RDU ZrO2 Sol-Gel Coating for the Corrosion Protection of Aluminum 30,000 On going
6 Dr. Salwani RDU1303114 RDU Impact Modeling of Automotive Side Member Made of Martensitic Boron Alloyed Steel, December 2013-November 2016 29,500 On going
7 Dr. Yuli P. Asmara RDU150372 RDU Develop Solid inhibitor for Hood Corrosion Protection in Automotive Application 30,500 On going
8 Dr. Yuli Panca Asmara RDU130337 RDU Modelling Experimental Work on Erosion and Corrosion of High Stress Steel (AISI-4340) in Oil and Gas Environmental Conditions 32,100 On Going
9 Dr. Tedi Kurniawan

RDU1703322

RDU

Graphene Dip Coating of Light Alloys for Automotive Application 

30,000 On Going
10 Dr. Dandi Bachtiar

RDU1703319

RDU

Effects of biodegradable PLA on hydroxyapatite coating to improve adhesion properties on Co-Cr-Mo alloy 

21,500

On Going
11 Dr. Mohd Akramin Mohd Romlay RDU170124 RDU

Development of the Overlay Formulation in Finite Element Model

22,000 On Going
12 Dr. Ruzaimi Rejab RDU160318 RDU

Development of Fibre Metal Laminate Materials for Automotive Application

33,000 On Going
13

Wan Anuar Wan Hassan

RDU1703312 RDU

Development of New Patch Shape for Bonded Patch Repair Method

20,000 On Going
                                                                                                       TOTAL 358,700  

 

 

LIST OF PUBLICATIONS

 2017

  1. M Aziz, T Kurniawan, T Oda, T Kashiwagi. Advanced power generation using biomass wastes from palm oil mills. Applied Thermal Engineering. Vol.114, p.1378-1386 (2017).
  2. NS Manam, WSW Harun, DNA Shri, SAC Ghani, T Kurniawan, MH Ismail, MHI Ibrahim. Study of corrosion in biocompatible metals for implants: A review. Journal of Alloys and Compounds. 701, p.698–715 (2017).
  3. 3.FF Alia, T Kurniawan, YP Asmara, MHB Ani, ABD Nandiyanto. High temperature oxidation in boiler environment of chromized steel. IOP Conference Series: Materials Science and Engineering 257 (1), 012086 (2017).
  4. MA Anwar, T Kurniawan, YP Asmara, WSW Harun, AN Oumar, ABD Nandyanto. Morphology evaluation of ZrO2 dip coating on mild steel and its corrosion performance in NaOH solution. IOP Conference Series: Materials Science and Engineering 257 (1), 012087 (2017).
  5. FF Alia, T Kurniawan, MHB Ani, ABD Nandiyanto. The Effect of Temperature on the Chromizing Process for Ferritic-Martensitic Steel. Journal of Physics: Conference Series 914 (1), 012026 (2017).
  6. Y P Asmara, V Suraj, J P Siregar, T Kurniawan, D Bachtiar and N M Z N Mohamed. Development of green vapour corrosion inhibitor. IOP Conference Series: Materials Science and Engineering 257 (1), 012089 (2017).
  7. Y P Asmara, Athirah, J P Siregar, T Kurniawan and D Bachtiar. Application of response surface methodology method in designing corrosion inhibitor. IOP Conference Series: Materials Science and Engineering 257 (1), 012089 (2017).
  8. W Hissyam, AM Halil, T Kurniawan, M Ishak, T Ariga. Effect of Copper-based Fillers Composition On Spreading and Wetting Behaviour. IOP Conference Series: Materials Science and Engineering 238 (1), 012020 (2017).
  9. Asep B. D. Nandiyanto, Zulfan A. Putra, R. Andika, Muhammad R. Bilad, T. Kurniawan, R. Zulhijah, I. Hamidah. Porous activated carbon particles from rice straw waste and their adsorption properties. Journal of Engineering Science and Technology, Special Issue on ASSEEC 2016, p.1-11.(2017)
  10. Akramin, M. R. M., Ariffin, A. K., Kikuchi, M. & Abdullah, S. 2017. Sampling method in probabilistic S-version finite element analysis for initial flaw size. Journal of the Brazilian Society of Mechanical Sciences and Engineering (1-9).
  11. 11.M.S. Shaari, A.K. Ariffin, Akiyuki Takahashi, S. Abdullah, Masanori Kikuchi and M.R.M. Akramin. 2017. Fatigue crack growth analysis on square prismatic with embedded cracks under tension loading. Journal of Mechanical Engineering and Sciences (JMES) Volume 11, Issue 1, pp. 2511-2525, March 2017.
  12. DB Mathivanan, JP Siregar, M.R.M Ruzaimi, D Bachtiar, YP Asmara. The Mechanical Properties of Alkaline Treated Pineapple Leaf Fibre to Reinforce Tapioca Based Bioplastic Resin Composite. Materials Science Forum 882, 66-70
  13. AGE Sutjipto, YP Asmara, MA Jusoh. Behavior of MgO Based Ceramics under Electron Irradiation. Procedia Engineering 170, 88-92 (2017)
  14. Mohammed M.Hasan, M.Ishak, M.R.M.Rejab. “Influence of machine variables and tool profile on the tensile strength of dissimilar AA7075-AA6061 friction stir welds”. 2017. The International Journal of Advanced Manufacturing Technology, Vol. 90, Issue 9-12, pp. 2605-2615.
  15. A.A.Mohammed, D.Bachtiar, M.R.M.Rejab, S.F.Hasany. “Effect of Potassium Permanganate on Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane”. 2017. Indian Journal of Science and Technology, Vol. 10, Issue 7, pp. 13-20.
  16. Mohammed M.Hasan, M.Ishak, M.R.M.Rejab. “Effect of backing material and clamping system on the tensile strength of dissimilar AA7075-AA2024 friction stir welds”. 2017. The International Journal of Advanced Manufacturing Technology, pp. 1-17
  17. N.Z.M.Zaid, M.R.M.Rejab, A.F.Jusoh, D.Bachtiar, J.P.Siregar. “Effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure”. 2017. MATEC Web of Conferences, Vol. 90, pp. 10-18.
  18. 18.Z. Ansari, M.R.M.Rejab, D.Bachtiar, J.Siregar. “Crushing Response of Green Square Honeycomb Structure from Sugar Palm & PLA”. 2017. Materials Science Forum,Vol. 99, pp. 122-126.
  19. 19.Quanjin, Ma; Rejab, MRM; Idris, MS; Bachtiar, D; Siregar, JP; Harith, MN; Design and optimize of 3-axis filament winding machine, IOP Conference Series: Materials Science and Engineering, 257(1), 12039, 2017
  20. Hamdan, MHM; Siregar, JP; Bachtiar, D; Rejab, MRM; Samykano, M; Agung, EH; Tezara, C; Jaafar, J; Effect of alkaline treatment on mechanical properties f woven ramie reinforced thermoset composite, IOP Conference Series: Materials Science and Engineering, 257(1), 12044, 2017
  21. 21.Romli, NK; Rejab, MRM; Bachtiar, D; Siregar, J; Rani, MF; Harun, WSW; Salleh Salwani Mohd; Merzuki, MNM; The behavior of Aluminium Carbon/Epoxy fibre metal laminate under quasi-static loading, IOP Conference Series: Materials Science and Engineering, 257(1), 12046, 2017
  22. Ansari, Z; Rejab, MRM; Bachtiar, D; Siregar, JP; Crushing Response of Green Square Honeycomb Structure from Sugar Palm & PLA, Materials Science Forum, 909, 122-126, 2017
  23. F. A. Zakaria, R. Daud, H. Mas Ayu, S. H. Tomadi, M. S. Salwani, Mohammed Rafiq Abdul Kadir (2017). The Effect of Position and Different Size of Radial Hole on Performance of Cannulated Pedicle Screw. ICMAA 2017, Bali Indonesia. (MATEC Web of Conferences | Scopus)
  24. Mohammad Raffik bin Khiyon, Salwani Mohd Salleh (2017). Effect of heat-treatment on the hardness and mechanical properties of Boron Alloyed Steel. AIGEV 2016, August 2016, Cyberjaya Malaysia. (MATEC Web of Conferences | Scopus)
  25. Salwani Mohd Salleh, Barkawi Sahari, Aidy Ali, Mas Ayu Hassan and Rosdi Daud (2017). Correlations between Axial and Oblique Loaded Column. International Conference on Design, Materials and Manufacturing 2016, March 2016, Kuala Lumpur Malaysia. (MATEC Web of Conferences | Scopus)
  26. H. MasAyu, S.Izman, R.Daud, A.Shah S.H.Tomadi, M.S. Salwani (2017). Surface Modification on CoCrMo Alloy to Improve the Adhesion Strength of Hydroxyapatite Coating. Procedia Engineering Vol 184 pp 399-408. (Scopus)
  27. N S Mohamed, J Alias. A review on the effect of welding on the corrosion of magnesium alloys. IOP Conference Series: Materials Science and Engineering 257 (1), 012028 (2017).
  28. W.S.W. Harun, R.I.M. Asri, J. Alias, F.H. Zulkifli, K. Kadirgama, S.A.C. Ghani, J.H.M. Shariffuddin, (2017). A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials, In Ceramics International, Volume 44, Issue 2, 2018, Pages 1250-1268.
  29. U. Donatus, G.E. Thompson, X. Zhou, J. Alias, I.-L. Tsai, Grain distinct stratified nanolayers in aluminium alloys, Materials Chemistry and Physics, Volume 188, 2017, Pages 109-114.

 2016

  1. Mohammed, A. A. S., Bachtiar, D., Siregar, J. P., Rejab, M. R. B. M., & Hasany, S. F. (2016). Physicochemical Study of Eco-Friendly Sugar Palm Fiber Thermoplastic Polyurethane Composites. BioResources, 11(4), 9438-9454.
  2. Jusoh, A. F., Rejab, M. R. M., Siregar, J. P., & Bachtiar, D. (2016). Natural Fiber Reinforced Composites: A Review on Potential for Corrugated Core of Sandwich Structures. In MATEC Web of Conferences (Vol. 74, p. 00033). EDP Sciences.
  3. Aziz, M., Kurniawan, T., Oda, T., & Kashiwagi, T. (2016). Advanced power generation using biomass wastes from palm oil mills. Applied Thermal Engineering. In press
  4. Asmara, Y. P., Agus, G., HNM, Z., & Bachtiar, D. (2016). Corrosion Inhibition of Carbon Steel in Oil and Gas Environments. International Journal of Advanced and Applied Sciences, 3(5), 88-91.
  5. Zaid, N. Z. M., Rejab, M. R. M., Jusoh, A. F., Bachtiar, D., Siregar, J. P., & Ping, Z. D. (2016). Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels. In MATEC Web of Conferences (Vol. 78, p. 01041). EDP Sciences.
  6. , B.B. Sahari, Aidy Ali, A.A. Nuraini (2016). Effect of Automotive Side Member Materials on the Head Injury Criteria (HIC) and Chest Severity Index (CSI) of Adult Passenger. International Journal of Engineering and Technologies Vol 7 pp 47-59.
  7. Nandiyanto, A. B. D., Munawaroh, H. S. H., Kurniawan, T., & Mudzakir, A. (2016). Influences of Temperature on the Conversion of Ammonium Tungstate Pentahydrate to Tungsten Oxide Particles with Controllable Sizes, Crystallinities, and Physical Properties. Indonesian journal of chemistry, 16(2), 124-129.
  8. Rejab, M., Bachtiar, D., Siregar, J., Paruka, P., Fadzullah, S., Zhang, B., & Cantwell, W. (2016). The Mechanical Behavior of Foam-filled Corrugated Core Sandwich Panels in Lateral Compression. In Proceedings of the American Society for Composites: Thirty-First Technical Conference.
  9. Mathivanan, D., Norfazilah, H., Siregar, J. P., Rejab, M. R. M., Bachtiar, D., & Cionita, T. (2016). The study of mechanical properties of pineapple leaf fibre reinforced tapioca based bioplastic resin composite. In MATEC Web of Conferences (Vol. 74, p. 00016). EDP Sciences.
  10. Yonghao, L., Farah, A., & Kurniawan, T. (2016). High Temperature Oxidation Behavior of T91 Steel in Dry and Humid Condition. Indonesian Journal of Science & Technology, 1(2), 232-237.
  11. AA, M., Bachtiar, D., Siregar, J. P., & MRM, R. (2016). Effect of sodium hydroxide on the tensile properties of sugar palm fibre reinforced thermoplastic polyurethane composites. Journal of Mechanical Engineering and Sciences (JMES), 10(1), 1765-1777.
  12. Mathivanan, D. B., Siregar, J. P., MRM, R., Bachtiar, D., & Tezara, C. (2016). Modification of Pineapple Leaf Fibre to Reinforce Polylactic Acid Composite with Improved Mechanical Properties. International Journal of Automotive and Mechanical Engineering (IJAME).
  13. M Rejab, M Ruzaimi, NZM Zaid, JP Siregar, D Bachtiar. Scaling Effects for Compression Loaded of Corrugated-Core Sandwich Panels. Advanced Materials Research 1133, 241-245.
  14. Asmara, Y. P., Siregar, J. P., Tezara, C., Nurlisa, W., & Jamiluddin, J. (2016). Long Term Corrosion Experiment of Steel Rebar in Fly Ash-Based Geopolymer Concrete in NaCl Solution. International Journal of Corrosion, 2016.
  15. Asmara, Y. P., Siregar, J. P., Tezara, C., & Ann, C. T. (2016). Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. In IOP Conference Series: Materials Science and Engineering (Vol. 114, No. 1, p. 012045). IOP Publishing.
  16. Kurniawan, T., Fauzi, F. A. B., & Asmara, Y. P. (2016). High-temperature Oxidation of Fe-Cr Steels in Steam Condition–A Review. Indonesian Journal of Science and Technology, 1(1).
  17. Fauzi, F. A., Kurniawan, T., Salwani, M. S., Bin, Y. S., & Harun, W. S. W. (2016). Chromium Enrichment on P11 Ferritic Steel by Pack Cementation. In MATEC Web of Conferences (Vol. 74, p. 00036). EDP Sciences.
  18. FA, F., Siregar, J. P., & Tezara, C. (2016). Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calorimetric Analysis.
  19. MSM, S., NAZ, A., Siti Norazila, Z., Siregar, J. P., & MM, R. (2016). Finite element model updating of natural fibre reinforced composite structure in structural dynamics. In MATEC Web of Conferences (Vol. 83, No. 03007, pp. 1-4). EDP Sciences.
  20. Fauzi, F. A., Taha, Z., Ghazalli, Z., Siregar, J. P., Ahmad, Z., Kadirgama, K., ... & Mohamed, D. (2017). Analysis of an Olympic Scale of a Recurve Bow Riser on the Basis of Malaysian Under 15 and Under 17 Archers. In Advances in Human Factors in Sports and Outdoor Recreation (pp. 131-140). Springer International Publishing.
  21. Fauziah, M., Azwan, K., Masniezam, A., & MRM, R. (2016). Foam filling effectiveness of conical aluminium tubes under dynamic axial and oblique loading.
  22. Zaid, N. Z. M., Rejab, M. R. M., & Mohamed, N. A. N. (2016). Sandwich Structure Based On Corrugated-Core: A Review. In MATEC Web of Conferences (Vol. 74, p. 00029). EDP Sciences.
  23. Hasan, M. M., Ishak, M., & Rejab, M. R. M. (2016). Influence of machine variables and tool profile on the tensile strength of dissimilar AA7075-AA6061 friction stir welds. The International Journal of Advanced Manufacturing Technology, 1-11.

  2015

  1. Y.P Asmara, J.P Siregar, L.H. Shah and C, Tezara. Experimental Investigations on Corrosion Model of Welded 6061 Aluminium Exposed in NaCl Solution,International Journal of Automotive and Mecahnical (IJAME), 11(2015), 2600–2607. (Scopus indexed)
  2. D. Mathivanan, J.P. Siregar, D. Bachtiar, M.R.M. Rejab and T. Cionita. Effect of fibre loading on the flexural properties of natural fibre reinforced polymer composites,Applied Mechanics and Materials, 695(2015), 85-88. (Scopus indexed)
  3. D. Bachtiar,J.P. Siregar, A.S. Sulaiman and M.R.M. Rejab, Tensile properties of hybrid sugar palm/kenaf fibre reinforced polypropylene composites,Applied Mechanics and Materials, 695(2015), 155-158. (Scopus indexed)
  4. J.P. Siregar, T. Cionita, D. Bachtiar and M.R.M. Rejab, Tensile properties of pineapple leaf fibre reinforced unsaturated polyester composites,Applied Mechanics and Materials, 695(2015), 159-162. (Scopus indexed)
  5. M.R.M. Rejab, W.A.W. Hassan,J.P. Siregarand D. Bachtiar, Specific properties of novel two-dimensional square honeycomb composites structures,Applied Mechanics and Materials 695(2015), 694-698. (Scopus indexed).
  6. YP Asmara,J.P Siregar, T Cionita, J Alias. Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas,Applied Mechanics and Materials, 695(2015), 98-101. (Scopus indexed)

 2014

  1. A.N. Oumer and D. Bachtiar, Modeling and experimental validation of tensile properties of sugar palm fiber reinforced high impact polystyrene composites, Fibers and Polymers, 15(2) (2014), 334-339. (IF=1.118)
  2. Asmara, Y. P., Alias, Kurniawan, T. Effects Pre-strain of Carbon Steel on Stress-Strain Diagram in CO2 Environment with the Presence of H2S.International Journal of Material Science Innovations (IJMSI), 2 (3). pp. 52-58 (2014).
  3. Ahmed N. Oumer, Idris Mat Sahat , Muhammad Ammar Nik Mu’tasim, and Tedi Kurniawan. Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, Vol. 1115, pp. 283-287 (2015). (Scopus indexed)

2013

  1. M.R. Ishak, S.M. Sapuan, Z. Leman, M.Z.A. Rahman, U.M.K. Anwar andJ.P. Siregar, Sugar Palm (Arenga pinnata): Its Fibres, Polymers and Composites,Carbohydrate Polymers, 91,no. 2, pp 699-710,2013 (Elsevier) (Impact factor = 3.62).
  2. D. Bachtiar, S.M. Sapuan, E.S. Zainudin, A. Khalina and K.Z.H.M. Dahlan, Thermal properties of alkali treated sugar palm fibre reinforced high impact polystyrene composites, (2013), Pertanika Journal of Science and Technology, 21(1), 149-158. (Scopus indexed) 

2012

  1. D. Bachtiar, S.M. Sapuan, E.S. Zainudin, A. Khalina and K.Z.H.M. Dahlan, The flexural and impact properties of chemically treatment sugar palm fiber reinforced high impact polystyrene composites, Fibers and Polymers, 13(7)(2012), 894-898. (IF=1.118)
  2. S.M. Sapuan and D. Bachtiar, Mechanical properties of sugar palm fibre reinforced high impact polystyrene composites, Procedia Chemistry, 4 (2012), 101-106. (Elsevier publisher)
  3. D. Bachtiar, S.M. Sapuan, E.S. Zainudin, A. Khalina and K.Z.H.M. Dahlan, The flexural, impact and thermal properties of untreated short sugar palm fibre reinforced high impact polystyrene composites, Polymers and Polymer Composites. 20(5)(2012), 493-502. (IF=0.309)